| Grade |
Features |
Typical Uses |
 Standard
|
| 2010 |
Super high-impact grade.
Highest molecular weight category. |
Ski binding parts, clips |
| SH210 |
Similar to 2010, but comparable
to Tenac-C copolymer in molding-process thermal stability. |
Ski binding parts, clips |
| 3010 |
High-impact, high-elongation
grade. 2nd-highest molecular weight category. |
Ski binding parts, rollers |
| SH310 |
Similar to 3010, but comparable
to Tenac-C copolymer in molding-process thermal stability. |
Ski binding parts, rollers |
| 4010 |
High-impact, high-elongation
grade. Medium viscosity. |
Tape recorder and VCR parts,
seat belt parts |
| SH410 |
Similar to 4010, but comparable
to Tenac-C copolymer in molding-process thermal stability. |
Tape recorder and VCR parts,
seat belt parts |
| 4060 |
Medium-viscosity grade with
reduced sliding noise. |
Motor parts |
| 5010 |
General-purpose grade. Balanced
flowability and mechanical properties. |
Gears, cams |
| SH510 |
Similar to 5010, but comparable
to Tenac-C copolymer in molding-process thermal stability. |
Gears, cams |
| 7010 |
High-flow grade. Suited
for thin-wall, long-flow-distance moldings. |
Fasteners, aerosol valve
parts, other multi-cavity molded parts |
| SH710 |
Similar to 7010, but comparable
to Tenac-C copolymer in molding-process thermal stability. |
Fasteners, aerosol valve
parts, other multi-cavity molded parts |
| High
Cycle |
| 5050 |
Standard-flow grade with
high crystallization rate for higher productivity. |
Tape recorder and VCR parts,
seat belt parts, gears |
| 7050 |
High-flow grade with high
crystallization rate for higher productivity. |
Cassette hubs, other multi-cavity
molded parts |
| 7054 |
Modified version of 7050,
with added characteristics required for VCR reels. |
VCR reels |
| 9054 |
Super high-flow grade with
high crystallization rate for higher productivity. |
Floppy disk parts |
| Weather
Resistant |
| 3013A |
High-viscosity grade containing
UV absorber and other additives for superior weatherability. |
Pipe fittings, rollers,
exterior automotive parts |
| 4013A |
Medium-viscosity grade containing
UV absorber and other additives for superior weatherability. |
Handles
and other interior automotive parts |
| 5013A |
Standard-flow grade containing
UV absorber and other additives for superior weatherability. |
Door handles, mirror bases |
Glass
Reinforced |
| GA510 |
10% GF-filled grade. Superior
dimensional stability. |
Chassis, levers |
| GA520 |
20% GF-filled grade. High-stiffness
and superior dimensional stability. |
Switch bodies |
| GN705 |
25% GF-filled grade. High
stiffness and high strength. |
Automotive switch bodies,
rollers, pump parts |
High
Lubricity |
| LT802 |
High impact, high elongation.
Excellent friction and wear on metals. |
Gears, rollers, bearings |
| LT804 |
Medium-viscosity. Excellent
friction and wear on metals. |
Keyboard parts, bearings
for office machine, gears |
| LT200 |
High-lubricity grade containing
special lubricants. |
Bearings,
guide cams |
| FS410 |
Contains fluoropolymer.
Excellent friction and wear on plastics. |
Speedometer bearings |
| LA541/LA543 |
High-lubricity grade. |
Gears, cams, keyboard parts |
| LM511 |
Excellent friction and wear
on metals and plastics other than POM. |
Keyboard parts, bearings
for office machine, gears |
| LS701 |
High-lubricity grade containing
silicone lubricants. |
Gears, cams, rollers |
Impact
Resistant, Soft |
| 4012 |
Medium-viscosity grade.
Reduced stiffness and increased elongation through addition
of special polymers. |
Hooks, press-fit parts |
