All information in this publication is given as a representation in good faith of data, information, and documents currently available to Asahi Kasei Corporation, and is subject to change as new information becomes available. It is the responsibility of the user to make their own determination as to the suitability or Stylac™ for the intended use. For the most current information, call Asahi Kasei Corporation at +81-3-6699-3385 or by facsimile at +81-3-6699-3492.
Always observe the following general precautions and consult the Material Safety Data Sheet (MSDS) before handling and use, which is available on request from Asahi Kasei Corporation. Prior to mixing or any additive or other material with Stylac™, investigate and determine its safety and suitability.
Health and safety
Avoid inhalation and eye or skin contact with any gases generated in drying or melting Stylac™, and with the hot or molten resin. Employ local ventilation and protective gear, including chemical goggles and protective gloves, during any melting or drying operation. In case of emergency, call one of the following. Japan: +81-44-271-2650(Asahi Kasei)
Stylac™ is flammable and must be kept strictly away from heat, sparks, and flame during handling and storage. In the event of fire, irritating and highly toxic gases may be generated by its thermal decomposition or combustion; extinguish with water, foam, or dry chemical extinguisher.
Perform disposal in accordance with local and national law and regulations, by burning in a properly equipped incineration or burial in landfill. Do not release to sewers, ground, or any body of water.
Keep Stylac™ strictly away from direct sunlight, water, high humidity, and moisture.
Never use Stylac™ for medical devices designed or intended for intracorporeal implantation or direct contact with body tissues and bodily fluids.
For specifics, refer to our division. Asahi Kasei Corporation encourages its customers to review their applications of its products from the standpoint of human health and environmental quality. To help ensure that Asahi Kasei Corporation products are not used in ways for which they are not intended or tested, Asahi Kasei Corporation representatives are willing to assist in dealing with ecological and product safety considerations.
DISCLAIMER OF WARRANTY AND LIABILITY
Although the information and recommendations set forth herein are presented in good faith and believed to be correct, Asahi Kasei Corporation expressly disclaims any and all representations and warranties as to the completeness and accuracy thereof.
Information is supplied upon the EXPRESS CONDITION THAT THE PERSONS RECEIVING SAME WILL MAKE THEIR OWN DETERMINATION AS TO ITS SUTABILITY FOR THEIR PURPOSES PRIOR TO USE.
Asahi Kasei Corporation warrants only that this product will perform according to the technical specifications provided in the MSDS and other materials provided by it. NO OTHER REPRESENTATIONS OR WARRANTIES, EXPRESSED OR IMPLIED, WHETHER ORAL OR ARISING BY USAGE OF TRADE OR COURSE OF DEALING, INCLUDING, WHITHOUT LIMITATION, ANY WARRANTIES OF FITNESS OR MERCHANTABILITY, shall be given any legal effect by this product or these materials.
This product has not been designed, tested, or intended for any use other than that for which it has been contracted for sale. This product is not warranted against injuries or damages of any kind caused by uses for which this product was not designed, tested, or intended.
Nothing contained herein is to be construed as a recommendation to use any product process, equipment or formulation in conflict with any patent, and Asahi Kasei Corporation makes no representation or warranty, express or implied, that the use thereof will not infringe any patent.
IN NO EVENT SHALL ASAHIKASEI CORPORATION BE LIABLE FOR ANY ANTICIPATED OR LOST PROFITS INCIDENTAL DAMAGES, CONSEQUENTILA DAMAGES, COSTS TIME SHARGES OR OTHER LOSSES WHETHER BASED ON BREACH OF CONTRACT TORTIOUS CONDUCT, OR ANY OTHER THEORY, INCURRED IN CONNECTION WITH THE PURCHASE OR USE OF THIS PRODUCT.
ASAHI KASEI CORPORATION DOES NOT AUTHORIZE ANYONE TO ASSUME FOR IT ANY LIABILITY OR TO MAKE ON ITS BEHALF ANY ADDITIONAL WARRANTIES IN CONNECTION WITH THESE MATERIALS.